

KIT BB GUIDE FOR MB4405 MB4406 MB4410 MB4411
- Available


FULL UPGRADE KIT FOR SPRING RIFLE STRIKER ARES AMOEBA
- Available


CALCIO TATTICO CTR NERO PER SERIE M4
- Available


GRILLETTO ELETTRONICO ETS DROP-IN COMPRESO MOSFET RECON VERSION
- Available


KIT BB GUIDE FOR MB4405 MB4406 MB4410 MB4411
COMPLETE KIT BB GUIDE
SUITABLE FOR SNIPER RIFLES WELL MB4405, MB4406, MB4410, MB4411 SERIES
Available
- Available


A1 Supreme Edition High Speed Motor Short Shaft Lonex
BRAND LONEX
A1 SUPREME EDITION motor.
RED caseback.
Model HIGH SPEED.
Short shaft.
Pinion steel.
Aluminum bearing cover.
Ball bearing supported motor shaft.
High torque and speed.
Speeds up to 45,000 RPM.
Extreme torque up to 4.5lb ft.
Very low battery consumption.
Maximum operating performance.
Compatibility with all AEG that use short shaft motor.
Main AEG short shaft (AK-G36-AUG-ETC...).
Available
- Available


A1 Supreme Edition High Speed Motor Medium Shaft Lonex
BRAND LONEX
A1 SUPREME EDITION motor.
RED caseback.
Model HIGH SPEED.
Medium shaft.
Pinion steel.
Aluminum bearing cover.
Ball bearing supported motor shaft.
High torque and speed.
Speeds up to 45,000 RPM.
Extreme torque up to 4.5lb ft.
Very low battery consumption.
Maximum operating performance.
Compatibility with all AEG that use medium shaft motor.
Main AEG medium shaft (SIG-PDW-PSG-ETC...).
Available
- Available


KWC MAGAZINE CATCH FOR PT92 SERIES
MAGAZINE CATCH FOR 6mm PISTOLS PT92 SERIES
SUITABLE ALSO FOR 6mm CYBERGUN TAURUS SERIES PISTOLS
Available
- Available


CYMA STOCK BUTT PLATE FOR AK SERIES
STOCK BUTT PLASTE
POLYMER AND METAL
SUITABLE FOR AK SERIES AIRSOFT RIFLES CYMA OR COMPATIBLE ONES
SCREW INCLUDED
DIMENSIONS 92mm x 34mm x 13mm
WEIGHT 40g
Available
- Available


Available
- Available


METAL FLASH HIDER 14X1 CCW
This CNC machined flash-hider is designed by ASG.
Built to fit any 14 mm CCW threading, it will fit most Airsoft guns out there.
The shape allows the mounting of the ROTEX III barrel extension tubes from BT (ref. 17312 and ref.17314)
-
Unique design
-
Fits the ROTEX III series
-
CNC machined
-
Anodized finish
-
Made from aluminum
-
Fits 14mm CCW
-
Designed by ASG
-
Available only from ASG
Available
- Available


Motor, INFINITY CNC U-40000, long axle
This is a long axle version, rated to run at 40000 rpm.
The latest high-performance motors in the ULTIMATE Upgrade Series are
made with CNC machined parts for greater strength and performance, and
have all been developed to include the latest technologically
developments, in a continuing effort to offer a wider selection of
motors allowing the discerning Airsoft player to find the optimal
solution for any particular upgrade.
For in-depth information on the INFINITY CNC series, see datasheet here.
Features:
- CNC machined aluminum front and back covers
- CNC machined pinion steel gear
- CNC machined stainless steel shaft
- Silicon steel rotor
- Precision built motor housing
- Heat resistant rare-earth magnets
- Enlarged motor-shaft ball-bearing stabilizers
- High-grade silver plated wiring and larger carbon brushes for improved electrical conductivity
The INFINITY CNC motors are designed, with the best features found in
Airsoft motors currently on the marked. The result is a motor which is
at the pinnacle of what is achievable today.
The INIFINITY CNC is the best of the best.
Available
- Available


Motor, INFINITY CNC U-45000, long axle
This is a long axle version, rated to run at 45000 rpm.
The latest high-performance motors in the ULTIMATE Upgrade Series are
made with CNC machined parts for greater strength and performance, and
have all been developed to include the latest technologically
developments, in a continuing effort to offer a wider selection of
motors allowing the discerning Airsoft player to find the optimal
solution for any particular upgrade.
For in-depth information on the INFINITY CNC series, see datasheet here.
Features:
- CNC machined aluminum front and back covers
- CNC machined pinion steel gear
- CNC machined stainless steel shaft
- Silicon steel rotor
- Precision built motor housing
- Heat resistant rare-earth magnets
- Enlarged motor-shaft ball-bearing stabilizers
- High-grade silver plated wiring and larger carbon brushes for improved electrical conductivity
The INFINITY CNC motors are designed, with the best features found in
Airsoft motors currently on the marked. The result is a motor which is
at the pinnacle of what is achievable today.
The INIFINITY CNC is the best of the best.
Available
- Available


Motor, INFINITY, CNC U-22000, long axle
Motor, INFINITY, CNC U-22000, long axle
Available
- Available


Precision barrel, 6,03 x 208, tight bore, EVO 3 A1, Aluminum
-Brand Madbull
-Precision Alu inner barrel
-For the ASG CZ Scorpion EVO 3 A1
Available
- Available


IFRIT MOTOR 25000RPM LONG
BRAND G&G
IFRIT 25000RPM engine.
Model 25K.
Long shaft version.
NEODIMIO magnets.
Thrust: 3Kg / cm
Balance SUPER HIGH TORQUE & SPEED.
FEATURES:
This particular gives high-revolutions capacity with the ability to develop important torques like the commercial High Torque (thanks to which the battery consumption is much lower than the High Speed competitors).
Available
- Available


FULL UPGRADE KIT FOR SPRING RIFLE STRIKER ARES AMOEBA
BRAND ARES
Full upgrade kit.
For STRIKER spring rifle.
Composed of:
Steel cylinder.
Steel cylinder head.
Bearing spring guide.
Piston upgrade with rear section in steel.
Upgrade spring h
Available
- Available


VALVOLA INTERNA PER CARICATORE CO2 TANFOGLIO
Available
- Available


KIT DI RIPARAZIONE WE PER PISTOLA MODELLO P08 LUGER
- REPAIR KIT WE
-FOR PISTOL MODEL P08 LUGER
INCLUDING:
- UPPER LOADER VALVE
- LOWER LOADER VALVE
-nozzle
Available
- Available


MOTORE TITAN 35K ALBERO LUNGO PER M4/M16/MP5
BRAND G&G
TITAN 35000RPM engine.
Model 35K.
Long shaft version.
High potential magnets.
Balance SUPER HIGH TORQUE & SPEED.
Not Available
- Not Available


GEAR BOX SILVER EDGE PER AMBIDESTRO PER M4/M16 CAVI POSTERIORI
-GEAR BOX RINFORZATO IN METALLO
-MODELLO SILVER EDGE
-PER SERIE M4/M16
-AMBIDESTRO
-CAVI POSTERIORI
-MOLLA CON SISTEMA DI CAMBIO RAPIDO
-BOCCOLE CUSCINETTATE 8mm
-TESTA PISTONE CUSCINETTATA
-GUIDA MOLLA CUSCINETTATA
-CAVI ELETTRICI AD ALTA CONDUZIONE.
-BASSO CONSUMO BATTERIA
-ADATTO AI FUCILI ELETTRICI APS DI ULTIMA GENERAZIONE CON SELETTORE AMBIDESTRO
Not Available
- Not Available


CALCIO TATTICO CTR TAN PER SERIE M4
-CALCIO TATTICO CTR
-PER SERIE M4
-COMPATIBILE CON TUTTE LE MARCHE.
-COLORE TAN
-INTERAMENTE IN POLIMERO.
Available
- Available


CALCIO TATTICO CTR NERO PER SERIE M4
-CALCIO TATTICO CTR
-PER SERIE M4
-COMPATIBILE CON TUTTE LE MARCHE.
-COLORE NERO
-INTERAMENTE IN POLIMERO.
Available
- Available


MOTOR ULTIMATE BOOST CUSTOM 30K LONG AXLE
- BRAND ULTIMATE
-ELECTRIC MOTOR LONG AXLE
- CUSTOM BOOST MODEL 30K
- HIGH performance VERSION.
- FOR SERIES P90 / M4 / M16 / SCAR-L // SCAR-H / G3 / MP5
- EXCELLENT LEVEL ELECTRIC COMPONENTS.
- CNC machined pinion steel gear
- CNC machined stainless steel shaft
- Silicon steel rotor
- Precision built motor housing
- Heat resistant magnets (Neodym)
- Enlarged motor-shaft ball-bearing stabilizers
- High-grade silver plated wiring and larger carbon brushes
Available
- Available


Available
- Available


GRILLETTO ELETTRONICO ETS DROP-IN COMPRESO MOSFET RECON VERSION
-E.T.S. GRILLETTO ELETTRONICO
-VERSIONE DROP-IN RECON VERSION
-COMPRESO MOSFET - Oversized Mosfet Unit?
-PER GEARBOX VERSIONE II
-GENERAZIONE 3
-VERSIONE MODIFICATA ED AGGIONATA
-DISPONIBILE VIDEO TUTORIAL PER IL MONTAGGIO
-MADE IN ITALY
CARATTERISTICHE TECNICHE:
-Tensione operativa 7.4V-14.8V
-Funzione Protezione LiPo programmabile 2-3-4 celle.
-Raffica programmabile 1-250 bb.
-Grilletto digitale.
-Cut-off digitale (il cut-off meccanico va rimosso)
-Selettore digitale.
-Sicura digitale (la sicura meccanica pu? essere rimossa, a scelta dell'utilizzatore)
-Potente Mosfet sovradimensionato.
-Compatibile con tutti i Mosfet .
-Risposta del grilletto pi? rapida.
-Cadenza di tiro pi? elevata.
-Nessun consumo batteria.
-Installazione semplice.
-Dimensioni compatte.
-Manuale istruzioni in italiano.
-Il tutto in valigetta rigida Negrini prodotta su misura.
Versione Drop in del gruppo di scatto elettronico E.T.S.? Electronic Trigger System con Mosfet ad alta capacit?.
Versione pronta per l'installazione ? anche per chi non possiede attrezzature per eseguire il montaggio della versione standard.
Installare la versione Drop-in ? semplice: basta rimuovere lo switch originale ed il cut-off meccanico.
(l' E.T.S. ? dotato di cut-off totalmente digitale) e montare al loro posto la scheda E.T.S.
Il tutto ? pre-assemblato in fabbrica, inclusi il mosfet maggiorato ed il connettore per la batteria.
Dispositivo elettronico tecnologicamente avanzato progettato e costruito in Italia con la migliore tecnologia disponibile e
compatibile con la maggior parte dei Gearbox V2 senza bisogno di apportare modifiche.
Terza Generazione con numerose migliorie nell'Hardware e con software V5.2.3 supportato dalla potente CPU e dalla Oversized Mosfet Unit?.
Facile da installare e programmare pur richiedendo un minimo di esperiemza e manualit?.
Istruzioni dettagliate in lingua italiana.
Permette di programmare la modalit? di tiro del tuo fucile.
Raffiche da 3-4-10 colpi o qualunque altro numero di bb compreso fra 1 e 250.
Significa avere anche una AEG che spara esclusivamente in modalit? semi o che smette di sparare dopo un certo numero
di colpi per simulare l'utilizzo di un caricatore a bassa capacit?.
Il software che equipaggia l'E.T.S.? non impone limiti.
L' unit? protegge la batterie Li-Po anche da 14,8v dal rigonfiamento dovuto a scariche eccessive.
Passare da una funzione ad un' altra ? semplice cos? come ripristinare le funzioni originali.
Addio anche ai ben noti problemi di carbonizzazionedei contatti grilletto.
La corrente passa attraverso il Mosfet che pu? essere installato nel tubo calcio o anche all'interno del gearbox.
L'E.T.S.? ? venduta come unit? completa insieme al Mosfet.
La confezione include tutto il necessario per il montaggio-inclusi cavi e guaina termo-restringente.
Nel caso abbiate gi? un mosfet installato sulla replica,il software che equipaggia l'E.T.S.? ? compatibile con altri mosfet.
La confezione E.T.S. Electronic Trigger System? + Oversized Mosfet Unit? full set include la scheda del grilletto
elettronico completa di sensori e CPU, MOSFET montato su una mini scheda separata che permette il montaggio all'interno
del tubo del calcio, senza sottrarre spazio alla batteria, o
all'interno del gearbox.
Available
- Available


GRILLETTO ELETTRONICO ETS DROP-IN COMPRESO MOSFET
-E.T.S. GRILLETTO ELETTRONICO
-VERSIONE DROP-IN
-COMPRESO MOSFET - Oversized Mosfet Unit?
-PER GEARBOX VERSIONE II
-GENERAZIONE 3
-VERSIONE MODIFICATA ED AGGIONATA
-DISPONIBILE VIDEO TUTORIAL PER IL MONTAGGIO
-MADE IN ITALY
CARATTERISTICHE TECNICHE:
-Tensione operativa 7.4V-14.8V
-Funzione Protezione LiPo programmabile 2-3-4 celle.
-Raffica programmabile 1-250 bb.
-Grilletto digitale.
-Cut-off digitale (il cut-off meccanico va rimosso)
-Selettore digitale.
-Sicura digitale (la sicura meccanica pu? essere rimossa, a scelta dell'utilizzatore)
-Potente Mosfet sovradimensionato.
-Compatibile con tutti i Mosfet .
-Risposta del grilletto pi? rapida.
-Cadenza di tiro pi? elevata.
-Nessun consumo batteria.
-Installazione semplice.
-Dimensioni compatte.
-Manuale istruzioni in italiano.
-Il tutto in valigetta rigida Negrini prodotta su misura.
Versione Drop in del gruppo di scatto elettronico E.T.S.? Electronic Trigger System con Mosfet ad alta capacit?.
Versione pronta per l'installazione ? anche per chi non possiede attrezzature per eseguire il montaggio della versione standard.
Installare la versione Drop-in ? semplice: basta rimuovere lo switch originale ed il cut-off meccanico.
(l' E.T.S. ? dotato di cut-off totalmente digitale) e montare al loro posto la scheda E.T.S.
Il tutto ? pre-assemblato in fabbrica, inclusi il mosfet maggiorato ed il connettore per la batteria.
Dispositivo elettronico tecnologicamente avanzato progettato e costruito in Italia con la migliore tecnologia disponibile e
compatibile con la maggior parte dei Gearbox V2 senza bisogno di apportare modifiche.
Terza Generazione con numerose migliorie nell'Hardware e con software V5.2.3 supportato dalla potente CPU e dalla Oversized Mosfet Unit?.
Facile da installare e programmare pur richiedendo un minimo di esperiemza e manualit?.
Istruzioni dettagliate in lingua italiana.
Permette di programmare la modalit? di tiro del tuo fucile.
Raffiche da 3-4-10 colpi o qualunque altro numero di bb compreso fra 1 e 250.
Significa avere anche una AEG che spara esclusivamente in modalit? semi o che smette di sparare dopo un certo numero
di colpi per simulare l'utilizzo di un caricatore a bassa capacit?.
Il software che equipaggia l'E.T.S.? non impone limiti.
L' unit? protegge la batterie Li-Po anche da 14,8v dal rigonfiamento dovuto a scariche eccessive.
Passare da una funzione ad un' altra ? semplice cos? come ripristinare le funzioni originali.
Addio anche ai ben noti problemi di carbonizzazionedei contatti grilletto.
La corrente passa attraverso il Mosfet che pu? essere installato nel tubo calcio o anche all'interno del gearbox.
L'E.T.S.? ? venduta come unit? completa insieme al Mosfet.
La confezione include tutto il necessario per il montaggio-inclusi cavi e guaina termo-restringente.
Nel caso abbiate gi? un mosfet installato sulla replica,il software che equipaggia l'E.T.S.? ? compatibile con altri mosfet.
La confezione E.T.S. Electronic Trigger System? + Oversized Mosfet Unit? full set include la scheda del grilletto
elettronico completa di sensori e CPU, MOSFET montato su una mini scheda separata che permette il montaggio all'interno
del tubo del calcio, senza sottrarre spazio alla batteria, o
all'interno del gearbox.
Available
- Available


CANNA ESTERNA PER AK47
-CANNA ESTERNA
-PER SERIE AK47
-COMPRESO CANNA INTERNA E HOP UP
Not Available
- Not Available